A fantastically in-depth look at some visage remixes. I love this blog http://www.versioncrazy.com/2026/04/07/visage-fade-to-grey-1988-cd-single/ #music
Has anyone tried the nextcloud "AIO" container image? A friend wants to use it but it gives me serious heebie jeebies / 🚨🚨🚨
bad news: we've updated pricing on lots of domains
good news: downwards
https://www.mythic-beasts.com/blog/2026/04/13/domain-price-reductions-2/
and now they're bouncing around to Rob Zombie. That one is not my influence at least
Eldest asked me to identify some music she was humming (ronda alla turca and william tell overture). Wife remarked I was "very knowledgeable"
Shall I admit it's my fondness for the Amiga Lemmings soundtrack to thank?
@rjek I love it. Is that their uptime or because you spin around and end up right where you started
O365 is so unbelievably poor. I'm trying to picture the aggregate lost efficiency of a massive corp using it versus e.g. Gsuite , and I cannot comprehend such a large number
@castaway it messed up too :( however I realised later that all my old gcode was sliced for a 0.4 nozzle and I’ve fitted a 0.6 now
New blog post: nvim-µwiki
https://jmtd.net/log/nvim-µwiki/
I blog about nvim-µwiki, a neovim plugin I wrote over a year ago but forgot about. #software #lua
https://jmtd.net/log/nvim-µwiki/
I blog about nvim-µwiki, a neovim plugin I wrote over a year ago but forgot about. #software #lua
@castaway found some old gcode, the printer actually warns that it is not using input shaping! let's see what happens
@castaway not certain. I’ve been suspicious of it ever since Input shaping was turned on in the slicer. I’m going to try and find the pre-input-shaping profiles; or dig out so really old gcode if I still have some. Thanks
This "curling" looks wrong to me. What could be causing it? This was recorded post filament load (during the "purge and check colour" phase)
disassembled extruder, cleaned out detritus, cleaned gears, re-assembled, printer still broken. GAH #3dprinting
OK. Plan for 3d printer is to look at the extruder now, start with cleaning the gears.
#3dprinting
#3dprinting
Happy ninth Mastodon Won't Survive Day to all who celebrate!
https://mashable.com/article/mastodon-wont-survive